전원 관리 DC/DC 스위칭 레귤레이터 스텝업(부스트) 레귤레이터 부스트 컨버터(내장 스위치)
NEW

TPS61299-Q1

활성

100nA Iq 5.5V boost converter with input current limit and fast transient performance

제품 상세 정보

Topology Boost Vin (min) (V) 0.5 Vin (max) (V) 5.5 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Switch current limit (typ) (A) 1.5 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 3000 Iq (typ) (mA) 0.0001 Features Bypass Mode Pass-through Mode, Enable, Load Disconnect, UVLO Fixed TI functional safety category Functional Safety-Capable Duty cycle (max) (%) 100 Operating temperature range (°C) -40 to 125 Rating Automotive
Topology Boost Vin (min) (V) 0.5 Vin (max) (V) 5.5 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Switch current limit (typ) (A) 1.5 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 3000 Iq (typ) (mA) 0.0001 Features Bypass Mode Pass-through Mode, Enable, Load Disconnect, UVLO Fixed TI functional safety category Functional Safety-Capable Duty cycle (max) (%) 100 Operating temperature range (°C) -40 to 125 Rating Automotive
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Input voltage range: 0.5V to 5.5V
  • 0.7V minimum input voltage for start-up
  • Input operating voltage down to 150mV with signal VIN > 0.7V
  • Output voltage range: 1.8V to 5.5V VSEL pin select output voltage
  • Average input current limit: 1.2A
  • 95nA typical quiescent current from VOUT
  • 60nA typical shutdown current from VIN and SW
  • Up to 91% efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 10µA
  • Up to 94 % efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 200mA
  • True disconnection at EN low
  • Automatic PFM/PWM mode transition
  • Auto pass-through at VIN > VOUT
  • Output SCP and thermal shutdown protections
  • SOT563 package (1.6mm x 1.6mm)

  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Input voltage range: 0.5V to 5.5V
  • 0.7V minimum input voltage for start-up
  • Input operating voltage down to 150mV with signal VIN > 0.7V
  • Output voltage range: 1.8V to 5.5V VSEL pin select output voltage
  • Average input current limit: 1.2A
  • 95nA typical quiescent current from VOUT
  • 60nA typical shutdown current from VIN and SW
  • Up to 91% efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 10µA
  • Up to 94 % efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 200mA
  • True disconnection at EN low
  • Automatic PFM/PWM mode transition
  • Auto pass-through at VIN > VOUT
  • Output SCP and thermal shutdown protections
  • SOT563 package (1.6mm x 1.6mm)

The TPS61299-Q1 is a synchronous boost converter with 95nA ultra-low quiescent current and average input current limit. The device provides a power solution for portable equipment with alkaline battery and coin cell battery. This device operates at high efficiency under light-load condition to achieve long operation time and average input current limit can avoid battery discharging with high current.

The TPS61299-Q1 has wide input voltage range from 0.5V to 5.5V and output voltage range from 1.8V to 5.5V. The average input current limit of this device is 1.2A. The TPS61299-Q1 with 1.2A current limit can support up to 500mA output current from 3V to 5V conversion and achieve approximately 94% efficiency at 200mA load.

The TPS61299-Q1 has optional fast-load transient performance at output voltage is 4.5V, 5V, or 5.5V.

The TPS61299-Q1 supports true shutdown function when it is disabled.

TThe TPS61299-Q1 offers a very small solution size with 1.6mm × 1.6mm SOT563 package.

The TPS61299-Q1 is a synchronous boost converter with 95nA ultra-low quiescent current and average input current limit. The device provides a power solution for portable equipment with alkaline battery and coin cell battery. This device operates at high efficiency under light-load condition to achieve long operation time and average input current limit can avoid battery discharging with high current.

The TPS61299-Q1 has wide input voltage range from 0.5V to 5.5V and output voltage range from 1.8V to 5.5V. The average input current limit of this device is 1.2A. The TPS61299-Q1 with 1.2A current limit can support up to 500mA output current from 3V to 5V conversion and achieve approximately 94% efficiency at 200mA load.

The TPS61299-Q1 has optional fast-load transient performance at output voltage is 4.5V, 5V, or 5.5V.

The TPS61299-Q1 supports true shutdown function when it is disabled.

TThe TPS61299-Q1 offers a very small solution size with 1.6mm × 1.6mm SOT563 package.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색을 지우고 다시 시도하십시오.
모두 보기2
유형 제목 날짜
* Data sheet TPS61299-Q1 95nA Quiescent Current, 5.5V Boost Converter with Input Current Limit and Fast Transient Performance datasheet PDF | HTML 2023/08/24
Functional safety information TPS61299-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2024/01/31

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 툴

PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®

TI용 PSpice®는 아날로그 회로의 기능을 평가하는 데 사용되는 설계 및 시뮬레이션 환경입니다. 완전한 기능을 갖춘 이 설계 및 시뮬레이션 제품군은 Cadence®의 아날로그 분석 엔진을 사용합니다. 무료로 제공되는 TI용 PSpice에는 아날로그 및 전력 포트폴리오뿐 아니라 아날로그 행동 모델에 이르기까지 업계에서 가장 방대한 모델 라이브러리 중 하나가 포함되어 있습니다.

TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
패키지 다운로드
SOT-5X3 (DRL) 6 옵션 보기

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

비디오