首頁 電源管理 DC/DC 開關穩壓器 升壓式 (升壓) 穩壓器 升壓轉換器 (整合式開關)
首頁
電源管理
DC/DC 開關穩壓器
升壓式 (升壓) 穩壓器
升壓轉換器 (整合式開關)
新增

TPS61299-Q1

現行

100nA Iq 5.5V boost converter with input current limit and fast transient performance

立即訂購
產品規格表

TPS61299-Q1

現行
產品規格表 立即訂購

產品詳細資料

Topology Boost Vin (min) (V) 0.5 Vin (max) (V) 5.5 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Switch current limit (typ) (A) 1.5 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 3000 Iq (typ) (mA) 0.0001 Features Bypass Mode Pass-through Mode, Enable, Load Disconnect, UVLO Fixed TI functional safety category Functional Safety-Capable Duty cycle (max) (%) 100 Operating temperature range (°C) -40 to 125 Rating Automotive
Topology Boost Vin (min) (V) 0.5 Vin (max) (V) 5.5 Vout (min) (V) 1.8 Vout (max) (V) 5.5 Switch current limit (typ) (A) 1.5 Type Converter Regulated outputs (#) 1 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 3000 Iq (typ) (mA) 0.0001 Features Bypass Mode Pass-through Mode, Enable, Load Disconnect, UVLO Fixed TI functional safety category Functional Safety-Capable Duty cycle (max) (%) 100 Operating temperature range (°C) -40 to 125 Rating Automotive
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Input voltage range: 0.5V to 5.5V
  • 0.7V minimum input voltage for start-up
  • Input operating voltage down to 150mV with signal VIN > 0.7V
  • Output voltage range: 1.8V to 5.5V VSEL pin select output voltage
  • Average input current limit: 1.2A
  • 95nA typical quiescent current from VOUT
  • 60nA typical shutdown current from VIN and SW
  • Up to 91% efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 10µA
  • Up to 94 % efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 200mA
  • True disconnection at EN low
  • Automatic PFM/PWM mode transition
  • Auto pass-through at VIN > VOUT
  • Output SCP and thermal shutdown protections

  • SOT563 package (1.6mm x 1.6mm)
  • AEC-Q100 qualified:
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
  • Functional Safety-Capable
  • Input voltage range: 0.5V to 5.5V
  • 0.7V minimum input voltage for start-up
  • Input operating voltage down to 150mV with signal VIN > 0.7V
  • Output voltage range: 1.8V to 5.5V VSEL pin select output voltage
  • Average input current limit: 1.2A
  • 95nA typical quiescent current from VOUT
  • 60nA typical shutdown current from VIN and SW
  • Up to 91% efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 10µA
  • Up to 94 % efficiency at VIN = 3.6V, VOUT = 5V, and IOUT = 200mA
  • True disconnection at EN low
  • Automatic PFM/PWM mode transition
  • Auto pass-through at VIN > VOUT
  • Output SCP and thermal shutdown protections

  • SOT563 package (1.6mm x 1.6mm)

The TPS61299-Q1 is a synchronous boost converter with 95nA ultra-low quiescent current and average input current limit. The device provides a power solution for portable equipment with alkaline battery and coin cell battery. This device operates at high efficiency under light-load condition to achieve long operation time and average input current limit can avoid battery discharging with high current.

The TPS61299-Q1 has wide input voltage range from 0.5V to 5.5V and output voltage range from 1.8V to 5.5V. The average input current limit of this device is 1.2A. The TPS61299-Q1 with 1.2A current limit can support up to 500mA output current from 3V to 5V conversion and achieve approximately 94% efficiency at 200mA load.

The TPS61299-Q1 has optional fast-load transient performance at output voltage is 4.5V, 5V, or 5.5V.

The TPS61299-Q1 supports true shutdown function when it is disabled.

TThe TPS61299-Q1 offers a very small solution size with 1.6mm × 1.6mm SOT563 package.

The TPS61299-Q1 is a synchronous boost converter with 95nA ultra-low quiescent current and average input current limit. The device provides a power solution for portable equipment with alkaline battery and coin cell battery. This device operates at high efficiency under light-load condition to achieve long operation time and average input current limit can avoid battery discharging with high current.

The TPS61299-Q1 has wide input voltage range from 0.5V to 5.5V and output voltage range from 1.8V to 5.5V. The average input current limit of this device is 1.2A. The TPS61299-Q1 with 1.2A current limit can support up to 500mA output current from 3V to 5V conversion and achieve approximately 94% efficiency at 200mA load.

The TPS61299-Q1 has optional fast-load transient performance at output voltage is 4.5V, 5V, or 5.5V.

The TPS61299-Q1 supports true shutdown function when it is disabled.

TThe TPS61299-Q1 offers a very small solution size with 1.6mm × 1.6mm SOT563 package.
open-in-new 尋找其它 升壓轉換器 (整合式開關)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋後再試一次。
檢視所有 2
類型 名稱 日期
* Data sheet TPS61299-Q1 95nA Quiescent Current, 5.5V Boost Converter with Input Current Limit and Fast Transient Performance datasheet PDF | HTML 2023年 8月 24日
Functional safety information TPS61299-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2024年 1月 31日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 引腳 下載
SOT-5X3 (DRL) 6 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中可靠性監測

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片