NEW

TPS389006-Q1

ACTIVE

Automotive multichannel overvoltage and undervoltage I²C programmable voltage supervisor and monitor

TPS389006-Q1

ACTIVE

Product details

Number of supplies monitored 6 Threshold voltage 1 (typ) (V) 0.2, 0.47, 0.5, 0.53, 0.66, 0.74, 0.75, 0.85, 1, 1.475, 1.68, 1.92, 3.1, 3.5, Adjustable Features Detection time delay, Reset time delay, Separate VDD & sense, Undervoltage and overvoltage monitor Reset threshold accuracy (%) 0.5 Iq (typ) (mA) 1 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 5.5 TI functional safety category Functional Safety-Compliant Rating Automotive Operating temperature range (°C) -40 to 125
Number of supplies monitored 6 Threshold voltage 1 (typ) (V) 0.2, 0.47, 0.5, 0.53, 0.66, 0.74, 0.75, 0.85, 1, 1.475, 1.68, 1.92, 3.1, 3.5, Adjustable Features Detection time delay, Reset time delay, Separate VDD & sense, Undervoltage and overvoltage monitor Reset threshold accuracy (%) 0.5 Iq (typ) (mA) 1 Output driver type/reset output Active-low, Open-drain Supply voltage (min) (V) 2.5 Supply voltage (max) (V) 5.5 TI functional safety category Functional Safety-Compliant Rating Automotive Operating temperature range (°C) -40 to 125
WQFN (RTE) 16 9 mm² 3 x 3
  • ASIL-D Functional Safety-Compliant
    • Development target for Functional Safety applications
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C
  • Monitor state-of-the art SOCs
    • ±6 mV threshold accuracy (–40°C to +125°C)
    • Input voltage range: 2.5 V to 5.5 V
    • Undervoltage lockout (UVLO): 2.48 V
    • Low standby quiescent current: 200 µA
    • 6 channels with 2 remote sense
    • Fixed window threshold levels
      • 5 mV steps from 0.2 V to 1.475 V
      • 20 mV steps from 0.8 V to 5.5 V
  • Miniature solution and minimal component cost
    • 3 mm x 3 mm QFN package
    • Adjustable glitch immunity via I 2C
    • User adjustable voltage threshold levels via I 2C
  • Designed for safety applications
    • Active-low open-drain NIRQ output
    • Built-in 8-bit ADC for real-time voltage readouts
    • Cyclic Redundancy Checking (CRC)
    • Packet Error Checking (PEC)
    • Sequence and fault logging
  • Sync function for rail tagging
  • ASIL-D Functional Safety-Compliant
    • Development target for Functional Safety applications
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to +125°C
  • Monitor state-of-the art SOCs
    • ±6 mV threshold accuracy (–40°C to +125°C)
    • Input voltage range: 2.5 V to 5.5 V
    • Undervoltage lockout (UVLO): 2.48 V
    • Low standby quiescent current: 200 µA
    • 6 channels with 2 remote sense
    • Fixed window threshold levels
      • 5 mV steps from 0.2 V to 1.475 V
      • 20 mV steps from 0.8 V to 5.5 V
  • Miniature solution and minimal component cost
    • 3 mm x 3 mm QFN package
    • Adjustable glitch immunity via I 2C
    • User adjustable voltage threshold levels via I 2C
  • Designed for safety applications
    • Active-low open-drain NIRQ output
    • Built-in 8-bit ADC for real-time voltage readouts
    • Cyclic Redundancy Checking (CRC)
    • Packet Error Checking (PEC)
    • Sequence and fault logging
  • Sync function for rail tagging

The TPS389006-Q1 device is an ASIL-D compliant six-channel window supervisor IC with two remote sense pins available in a 16-pin 3 mm x 3 mm QFN package. This high accuracy multichannel voltage supervisor is designed for systems that operate on low-voltage supply rails and have narrow margin supply tolerances.

Remote sense pins enable a highly accurate voltage measurement on the high current core rail by accounting for voltage drop across PCB traces. I 2C functionality gives flexibility in selecting thresholds, reset delays, glitch filters, and pin functionality. The internal glitch immunity and noise filters eliminate the need for external RC components to reduce false resets resulting from power transients. In addition, device does not require any external resistors for setting overvoltage and undervoltage reset thresholds, which further optimizes overall accuracy, cost, solution size, and improves reliability for safety systems.

This device offers CRC error checking, sequence logging during turn ON or turn OFF, and a built-in ADC for voltage readouts to provide redundant error checking. In addition, TPS389006-Q1 offers a sync feature for tagging rails as they come up. TPS389006-Q1 device also pairs with TI’s power-supply sequencer TPS38700-Q1 to ensure proper power-on sequence in addition to voltage monitoring for ASIL-D level compliance.

The TPS389006-Q1 device is an ASIL-D compliant six-channel window supervisor IC with two remote sense pins available in a 16-pin 3 mm x 3 mm QFN package. This high accuracy multichannel voltage supervisor is designed for systems that operate on low-voltage supply rails and have narrow margin supply tolerances.

Remote sense pins enable a highly accurate voltage measurement on the high current core rail by accounting for voltage drop across PCB traces. I 2C functionality gives flexibility in selecting thresholds, reset delays, glitch filters, and pin functionality. The internal glitch immunity and noise filters eliminate the need for external RC components to reduce false resets resulting from power transients. In addition, device does not require any external resistors for setting overvoltage and undervoltage reset thresholds, which further optimizes overall accuracy, cost, solution size, and improves reliability for safety systems.

This device offers CRC error checking, sequence logging during turn ON or turn OFF, and a built-in ADC for voltage readouts to provide redundant error checking. In addition, TPS389006-Q1 offers a sync feature for tagging rails as they come up. TPS389006-Q1 device also pairs with TI’s power-supply sequencer TPS38700-Q1 to ensure proper power-on sequence in addition to voltage monitoring for ASIL-D level compliance.

Download View video with transcript Video
Request more information

Functional safety manual and reports are available. Request now

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet TPS389006-Q1 Multichannel Overvoltage and Undervoltage I2C Programmable Voltage Supervisor and Monitor datasheet (Rev. B) PDF | HTML 05 May 2023
EVM User's guide TPS389006Q1EVM Multichannel Voltage Supervisor with I2C (Rev. B) PDF | HTML 31 Jul 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS389006Q1EVM — TPS389006 evaluation module for multichannel, overvoltage and undervoltage, I²C voltage supervisor

The TPS389006Q1 evaluation module (EVM) is a platform for evaluating the six-channel TPS389006-Q1, which is an integrated overvoltage and undervoltage supervisor with I2C programmability. TPS389006-Q1 is available in a 16-pin very-thin quad flatpack no-lead (WQFN) package. In addition, (...)

User guide: PDF | HTML
Not available on TI.com
Application software & framework

FUSION_DIGITAL_POWER_DESIGNER — Digital Power Software

Fusion Digital Power™ graphical user interface (GUI) software is used to configure and monitor select Texas Instruments digital power controllers and sequencer/health monitors. The application uses the PMBus protocol to communicate with the device over serial bus by way of a TI USB adapter.
Calculation tool

TPS38900X-THRESHOLD-VOLTAGE-TOOL TPS38900x threshold voltage tool

Multi-Channel Threshold Voltage Tool
Supported products & hardware

Supported products & hardware

Products
Supervisor & reset ICs
TPS389006 Multichannel overvoltage and undervoltage I²C programmable voltage supervisor TPS389006-Q1 Automotive multichannel overvoltage and undervoltage I²C programmable voltage supervisor and monitor
Design tool

TPS389387EVM Design Tool

SNVR530.ZIP (76 KB)
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
WQFN (RTE) 16 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos