首頁 數據轉換器 類比轉數位轉換器 (ADC) 精確 ADC
首頁
數據轉換器
類比轉數位轉換器 (ADC)
精確 ADC
新增

ADS1288

現行

Low-power, 32-bit two-channel delta-sigma ADC for seismic and geospace exploration

立即訂購
產品規格表

ADS1288

現行
產品規格表 立即訂購

產品詳細資料

Resolution (Bits) 32 Sample rate (max) (ksps) 2 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.5 Input voltage range (min) (V) -2.5 Features GPIO, PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 5 Analog supply (min) (V) 3 Analog supply voltage (max) (V) 5.5 SNR (dB) 121 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 32 Sample rate (max) (ksps) 2 Number of input channels 2 Interface type SPI Architecture Delta-Sigma Input type Differential Multichannel configuration Multiplexed Rating Catalog Reference mode External Input voltage range (max) (V) 2.5 Input voltage range (min) (V) -2.5 Features GPIO, PGA Operating temperature range (°C) -40 to 85 Power consumption (typ) (mW) 5 Analog supply (min) (V) 3 Analog supply voltage (max) (V) 5.5 SNR (dB) 121 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
VQFN (RHB) 32 25 mm² 5 x 5
  • Power consumption:
    • PGA operation: 5mW (typical)
    • Buffer operation: 3mW (typical)
  • Dynamic range:
    • PGA gain: 1, 500SPS (122dB, typical)
    • Buffer operation: 500SPS (122dB, typical)
  • THD: < –120dB (typical)
  • CMRR: 120dB (typical)
  • Flexible digital filter:
    • Selectable sinc + FIR + IIR
    • Linear or minimum phase
    • High-pass filter
  • Data rates: 125SPS to 2000SPS
  • PGA gains: 1 to 64
  • SYNC input
  • Clock error compensation
  • Two-channel multiplexer
  • Offset and gain calibration
  • General-purpose digital I/Os
  • Analog supply operation: 5V, 3.3V, or ±2.5V
  • Power consumption:
    • PGA operation: 5mW (typical)
    • Buffer operation: 3mW (typical)
  • Dynamic range:
    • PGA gain: 1, 500SPS (122dB, typical)
    • Buffer operation: 500SPS (122dB, typical)
  • THD: < –120dB (typical)
  • CMRR: 120dB (typical)
  • Flexible digital filter:
    • Selectable sinc + FIR + IIR
    • Linear or minimum phase
    • High-pass filter
  • Data rates: 125SPS to 2000SPS
  • PGA gains: 1 to 64
  • SYNC input
  • Clock error compensation
  • Two-channel multiplexer
  • Offset and gain calibration
  • General-purpose digital I/Os
  • Analog supply operation: 5V, 3.3V, or ±2.5V

The ADS1288 is a 32-bit, low-power, analog-to-digital converter (ADC), with a programmable gain amplifier (PGA) and a finite impulse response (FIR) filter. The ADC is designed for the demanding requirements of seismology equipment requiring low power consumption to extend battery run time.

The low-noise PGA extends the ADC dynamic range through gains 1 to 64. The PGA allows direct connection to geophones and transformer-coupled hydrophones without the need of an external amplifier. The optional unity-gain buffer reduces power consumption.

The ADC incorporates a high-resolution, delta-sigma (ΔΣ) modulator and a FIR filter with programmable phase response. The high-pass filter removes dc and low-frequency content from the signal. Clock frequency error is compensated by the sample rate converter with up to 7ppb frequency accuracy.

The ADC supports 3.3V operation to minimize device power consumption. Power consumption is 3mW (typical) in buffer mode operation and 5mW (typical) in PGA mode operation.

The ADC is available in a compact 5mm × 5mm VQFN package and is fully specified over the –40°C to +85°C ambient temperature range.

The ADS1288 is a 32-bit, low-power, analog-to-digital converter (ADC), with a programmable gain amplifier (PGA) and a finite impulse response (FIR) filter. The ADC is designed for the demanding requirements of seismology equipment requiring low power consumption to extend battery run time.

The low-noise PGA extends the ADC dynamic range through gains 1 to 64. The PGA allows direct connection to geophones and transformer-coupled hydrophones without the need of an external amplifier. The optional unity-gain buffer reduces power consumption.

The ADC incorporates a high-resolution, delta-sigma (ΔΣ) modulator and a FIR filter with programmable phase response. The high-pass filter removes dc and low-frequency content from the signal. Clock frequency error is compensated by the sample rate converter with up to 7ppb frequency accuracy.

The ADC supports 3.3V operation to minimize device power consumption. Power consumption is 3mW (typical) in buffer mode operation and 5mW (typical) in PGA mode operation.

The ADC is available in a compact 5mm × 5mm VQFN package and is fully specified over the –40°C to +85°C ambient temperature range.
open-in-new 尋找其它 精確 ADC
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋後再試一次。
檢視所有 1
類型 名稱 日期
* Data sheet ADS1288 32-Bit, Delta-Sigma ADC for Seismic Applications datasheet PDF | HTML 2024年 2月 1日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ADS1285EVM-PDK — 適用於 32 位元、高解析度、二通道 delta-sigma ADC 的 ADS1285 性能展示套件

ADS1285 評估模組 (EVM) 性能展示套件 (PDK) 是一款結合 ADS1285EVM-PDK 和精確主機介面 (PHI) 控制器板的平台。PHI 控制器板可讓 ADS1285EVM 透過 USB 埠連接電腦，並與設計用於完全評估 ADS1285 的軟體連接。

使用指南: PDF | HTML
TI.com 無法提供
計算工具

ANALOG-ENGINEER-CALC — 類比工程師計算機

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
檢視選項
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
檢視選項
封裝 引腳 下載
VQFN (RHB) 32 檢視選項
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中可靠性監測

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片